Bang-olufsen BeoLab 7-6 - User Guide Manual de usuario descargar pdf (Pagina 5)

To fasten the loudspeaker

Here is explained how to fasten the

loud speaker to a Bang & Olufsen

stand.

a Remove the two small covers (if

any) on the stand. Press each

cover as shown, and they will

come loose.

b Fasten the bracket to the stand.

Use the four longest screws

(M5 × 25 mm).

c Fasten the loudspeaker to the

bracket. Use the two short screws

(M5 × 8 mm). However, do not

fully tighten the screws before

you have made the adjustments

mentioned below (d).

Adjustments: First, make sure that

the television is adjusted to a level

position on its stand! Then use the

two screws (d) to adjust the loud-

speaker so that it is parallel to the

lower edge of the television. Align

the loud speaker front with the tele-

vision and tighten the two screws

(c).

d d

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Bang-olufsen BeoLab 7-6 - User Guide Manual de usuario Pagina 5